The notion that underground fencin systems” should be buried “underground” is still believed by most people. However, it is still recommended to bury the wire so dog owners don’t practically need to deal with it over and over again, but if dog owners're not up for the dirt and hassle of burying.. we are here to help.

No need to be hesistant in getting underground dog fences. Dog owners may not have their own yard, or the tools to dig, but so what? Here's our latest product that will surely cater to the various problems regarding wireless dog fences and help dog owners get rid of the installation worries.

Pet containment with underground dog fences will save dog owners from all the troubles that other products can give dog owners. With the wire securing staples, the hardest thing to do before will now be as easy as 1-2 steps. All dog owners have to do is to lay the wire down and after a good rain the wire will sink and dog owners won’t be able to see it again. Isn’t it a perfect hassle free solution to installation difficulties?

 

Follow this above ground installation guide for proper and safe usage of our systems.

Step 1:

» First lay out the boundary wire in the desired shape and around the area dog owners want to contain. From the boundary wire run twisted wire to the transmitter and pug it in.
» Once dog owners have decide the system dog owners chose is correct for dog owners, "Staple" the twisted wire to the ground by hammering in a wire "Staple" every 5 - 6 feet.
» Now stop and look at the wire. Is it completely flush to the ground all the way to the start of the boundary? The wire MUST completely touch the ground. If not go and "Staple" any raised areas before proceeding to the next step.

Step 2:

» Place a "Staple" where the twisted wire and the beginning of the boundary meet (if dog owners have a splice in this area please dig a small hole about 2 inches deep and bury the splice. Then place a "Staple" in the front of and behind the splice to relieve any pressure on the splice)
» Next, walk to the first corner of the boundary and "Staple" it to the ground. Repeat this step for all corners of the boundary. (Not all yards are square if dog owners do not have corners on the boundary please select multiple anchor points for the wire)
» Now place staples as needed and make sure to staple any raised areas down until they are completely flush with the ground, for maximum safety for dog owners and the guests.